inletk — Receives a krate signal into an instrument from a named port.


Receives a krate signal into an instrument from a named port.


ksignal inletk Sname


Sname -- String name of the inlet port. The name of the inlet is implicitly qualified by the instrument name or number, so it is valid to use the same inlet name in more than one instrument (but not to use the same inlet name twice in one instrument).


ksignal -- krate input signal

During performance, the krate inlet signal is received from each instance of an instrument containing an outlet port to which this inlet has been connected using the connect opcode. The signals of all the outlets connected to an inlet are summed in the inlet.


Here is an example of the inletk opcode. It uses the file inletk.csd.

Example 418. Example of the inletk opcode.

; Select audio/midi flags here according to platform
-odac     ;;;realtime audio out
;-iadc    ;;;uncomment -iadc if realtime audio input is needed too
; For Non-realtime ouput leave only the line below:
; -o inletk.wav -W ;;; for file output any platform

sr = 44100
ksmps = 32
nchnls = 2
0dbfs  = 1

connect "bend", "bendout", "guitar", "bendin" 

instr bend 

kbend line p4, p3, p5 
      outletk "bendout", kbend 

instr guitar 

kbend inletk "bendin" 
kpch pow 2, kbend/12
     printk2 kpch
asig oscili .4, 440*kpch, 1 
     outs asig, asig

f1 0 1024 10 1

i"guitar" 0 5 8.00 
i"bend" 3 .2 -12 12 
i"bend" 4 .1 -17 40 

See Also

outleta outletk outletkid outletf inleta inletf connect alwayson ftgenonce


By: Michael Gogins 2009