schedkwhennamed — Similar to schedkwhen but uses a named instrument at init-time.


Similar to schedkwhen but uses a named instrument at init-time.


schedkwhennamed ktrigger, kmintim, kmaxnum, "name", kwhen, kdur \
      [, ip4] [, ip5] [...]


ip4, ip5, ... -- Equivalent to p4, p5, etc., in a score i statement


ktrigger -- triggers a new score event. If ktrigger is 0, no new event is triggered.

kmintim -- minimum time between generated events, in seconds. If kmintim is less than or equal to 0, no time limit exists.

kmaxnum -- maximum number of simultaneous instances of named instrument allowed. If the number of existant instances of the named instrument is greater than or equal to kmaxnum, no new event is generated. If kmaxnum is less than or equal to 0, it is not used to limit event generation.

"name" -- the named instrument's name.

kwhen -- start time of the new event. Equivalent to p2 in a score i statement. Measured from the time of the triggering event. kwhen must be greater than or equal to 0. If kwhen greater than 0, the instrument will not be initialized until the actual time when it should start performing.

kdur -- duration of event. Equivalent to p3 in a score i statement. If kdur is 0, the instrument will only do an initialization pass, with no performance. If kdur is negative, a held note is initiated. (See ihold and i statement.)

[Note] Note

While waiting for events to be triggered by schedkwhennamed, the performance must be kept going, or Csound may quit if no score events are expected. To guarantee continued performance, an f0 statement may be used in the score.

[Note] Note

Note that the schedkwhennamed opcode can't accept string p-fields. If you need to pass strings when instantiating an instrument, use the scoreline or scoreline_i opcode.


Here is an example of the schedkwhennamed opcode. It uses the file schedkwhennamed.csd.

Example 817. Example of the schedkwhennamed opcode.

See the sections Real-time Audio and Command Line Flags for more information on using command line flags.

; Select audio/midi flags here according to platform
; Audio out   Audio in    No messages
-odac           -iadc     -d
; For Non-realtime ouput leave only the line below:
; -o schedkwhennamed.wav -W ;;; for file output any platform

  sr	    =  48000
  ksmps	    =  16
  nchnls    =  2
  0dbfs	    =  1

; Example by Jonathan Murphy 2007

  gSinstr2  =  "printer"

    instr 1

  ktrig	    metro     1
if (ktrig == 1) then
  ;Call instrument "printer" once per second
	    schedkwhennamed   ktrig, 0, 1, gSinstr2, 0, 1



    instr printer

  ktime	    timeinsts
	    printk2   ktime


i1 0 10

See also

event, event_i, schedule, schedwhen, schedkwhen, scoreline, scoreline_i


Author: Rasmus Ekman
EMS, Stockholm, Sweden

New in Csound version 4.23